How to Reset Airpods: Full Step-By-Step Guide

Welcome to our comprehensive guide on resetting AirPods! Whether you’re experiencing connectivity issues or audio problems, or simply want to start fresh with your AirPods, performing a reset can often be the solution.

In this guide, we’ll walk you through the step-by-step process of how to reset AirPods, covering different models and scenarios. By following these easy instructions, you can troubleshoot common problems and enjoy a seamless listening experience. Let’s dive in and learn how to reset your AirPods with confidence.

How to Reset Airpods

Why Reset Your Apple AirPods?

When faced with challenges such as unresponsive charging, initiating a reset can frequently resolve this concern effectively. Furthermore, in instances where connectivity problems persist—like difficulty establishing a connection or frequent disconnections—alongside software anomalies, opting to disconnect the AirPods and make a reset stand as the initial course of action to rectify the situation. It’s important to note that if the reset procedure fails to address the issue, seeking assistance from Apple support becomes a prudent step to further diagnose and address the matter.

How to Reset AirPods with iPhone or iPad

Resetting your AirPods can swiftly address connectivity or audio concerns. Follow these steps to reset your AirPods using your iPhone:

  1. Place both AirPods in the charging case and shut the lid, waiting for 30 seconds.
  2. Open the AirPods case lid to establish a connection between the AirPods and your iPhone.
  3. Take the AirPods out of the charging case and put them on.
  4. Select “Bluetooth” settings on your iPhone or iPad.
  5. Locate your AirPods in the list of connected devices, and tap the “i” button next to their name.
    Reset AirPods Pro
  6. Scroll down and find the “Forget This Device” option, then tap it.
    Forget This Device
  7. Put the AirPods back in the charging case with the lid open.
  8. Press and hold the “Set Up” button on the back of the charging case until the status light changes from amber to white.

With these steps completed, your AirPods are now reset. You’re ready to initiate the setup process by placing the AirPods close to an Apple device.

This video tutorial will help you make AirPods and AirPods Pro Reset:

VIDEO
How to Factory Reset AirPods & AirPod Pro

How to Factory Reset AirPods and AirPods Pro without iPhone

Factory resetting your AirPods when your iPhone or iPad isn’t accessible is possible. Here’s the concise method for accomplishing this:

  1. Insert both AirPods into the charging case and open the lid.
  2. Press and hold the “Setup” button located at the rear of the charging case until the status light transitions from amber to white.
    setup button callout
  3. Close the case lid. Your AirPods or AirPods Pro have now been factory reset.
VIDEO
How to Reset Apple Airpods

How to Factory Reset Apple AirPods Max

To perform a factory reset on your Apple AirPods Max, follow these steps:

  1. Ensure your AirPods Max has sufficient battery charge. If unsure, follow our guide on checking AirPods battery levels:
    1.1. Remove your AirPods from the case and open it;
    1.2. Check the status light, which is either on the front of the case or inside it. If the status light is green, your case is charged. If it is amber, your case has less than one charge left.
    1.3. Or check the charge status of AirPods with the Batteries widget on your iPhone, iPad, or iPod touch.
  2. Press and hold both the “Digital Crown” and “Noise Control” buttons simultaneously for approximately 15 seconds.
    AirPods Max side button digital crown
  3. Wait until the LED indicator flashes amber followed by white. At this point, your AirPods Max are reset, and you can proceed to connect them to your Apple iPhone or Mac device.

This video shows the instructions on how to factory reset Apple AirPods Max:

VIDEO
AirPods Max: How Restart & Factory Reset (Problems with Finding or Pairing? Fixed!)

How to Remove Apple ID from Apple AirPods

To disassociate your Apple ID from your Apple AirPods, a necessary step when obtaining used AirPods or preparing to sell your own, follow these concise instructions:

  1. Open the Find My app and navigate to the “Devices” section on the screen’s bottom.
    Find my app
  2. Locate your AirPods in the list and swipe left on their name, then tap “Delete.”
  3. Next, select the “Remove” option.
  4. Enter your Apple ID Password and tap “OK” in the top right corner.

By following these steps, you successfully remove your Apple ID from the AirPods, enabling you to subsequently reset them using the provided instructions.

When AirPods Refuse to Reset

Should your attempts to reset your AirPods remain unsuccessful even after following the aforementioned steps, an underlying issue might be at play. In such instances, consider these supplementary strategies.

Thoroughly Clean Your AirPods and Case

Accumulated dirt or debris on the AirPods’ stems and within the charging case can impede proper contact with the charging plate. This interference prevents a successful reset. Utilize a lint-free cloth or paper towel, damp Q-tips with 70% isopropyl alcohol, and exercise caution. Pay special attention to the AirPods’ tails and the interior of the case. If stubborn dirt persists, a toothpick can offer precise assistance. Ensure thorough drying before use.

Engage Apple Support

Should these efforts yield no positive results, potential hardware issues could be to blame. Contacting Apple support becomes a prudent step. Prepare your AirPods’ serial number for verification. Alternatively, visiting an Apple Store grants access to certified technicians who can assess whether replacements or warranty coverage are viable options.

FAQ

Why can’t I reset my AirPods?

Performing a reset on your AirPods consumes a portion of their battery capacity. Consequently, if your AirPods possess a low charge, they might lack the required energy for the reset process. This underscores the importance of fully charging your AirPods prior to initiating a reset procedure.

Why can’t I factory reset my AirPods Pro?

The prevalent cause for AirPods failing to reset, indicated by the absence of white light, often stems from a damaged case. Conversely, the presence of dirt and debris on either the charging case connector or the AirPods themselves can also lead to this issue.

How do I reboot my AirPods Pro?

Place AirPods in the charging case and close the lid. Wait 30 seconds. Put AirPods in the ears. Go to Settings > Bluetooth or [your AirPods]. If connected, tap More Info, then Forget This Device twice. If not connected, proceed. Keep AirPods in an open case, press the setup button for 15 seconds until the flashing light. Reconnect AirPods: With the case open, place it near the device and follow the on-screen steps.

Conclusion

In conclusion, resetting your AirPods can be a straightforward solution to a range of connectivity and performance issues. Whether you’re encountering connection problems, audio glitches, or other concerns, following the step-by-step instructions provided in this guide empowers you to successfully reset your AirPods.

By taking this simple yet effective action, you can restore optimal functionality and enjoy an excellent sound experience. Remember that if you encounter persistent difficulties, seeking assistance from Apple support ensures that your AirPods receive the attention they need. With the knowledge gained from this guide, you’re equipped to confidently address various challenges and make the most of your AirPods.

  • Was this article helpful? 0
  • YesNo

Michael Dixon

Michael Dixon

After earning a degree in sound engineering from Full Sail University, I've dedicated my life to the intricacies of sound. Over the years working with giants such as SVS and Harman/Kardon, I have expanded my knowledge and experience. As a tech enthusiast and author, I follow the latest developments and presentations in the gadget industry with great interest. Possessing 13 years of experience in the field of audio technology, I've cultivated a sharp acumen for identifying upcoming breakthroughs in this domain, and I take pleasure in imparting my perspectives to others. My goal is to provide readers with the most accurate and up-to-date information possible, as well as analyze the innovations and trends shaping the technological future.

We will be happy to hear your thoughts

Leave a comment

Reviews Technology
Logo