How to Get Water Out of Your Phone Speaker
Have you ever dropped your phone in a tub full of water? Note that all the liquid staying within can cause severe damage to your speaker, even if the phone has dried up.
After reading this article, we’ll ensure you know how to get water out of your phone speaker. Get ready to try these recommendations out.
Table of Contents
Get water out of your speaker
Does putting a phone in rice work?
You might’ve seen tons of videos on popular services about digging your phone in uncooked rice, hoping it’ll absorb moisture after some time.
The answer is yes; it might work since the grains suck water in being as dry as a bone. However, the issue is in powder particles stuck in the mobile speaker and charging port.
Saying “yes” doesn’t mean this method is effective and safe enough for your phone speaker grills, as grains can potentially get inside and harm speakers.
Quick Guide: How to Save Your Phone
Remove water: wipe, take out the battery and sim card
If you dropped your device in the bath or elsewhere:
- immediately switch it off;
- in case this action is not possible, pull out the battery and SIM tray, display a sim card;
- dry everything with a soft cloth;
- keep your phone upturned on a piece of fabric for 10-15 minutes.
It’s recommended not to utilize it as long as you see it wet to avoid circuit issues.
Use Siri ‘Water Eject’ Shortcut or Android Speaker Cleaner Feature
The iOS Siri water eject shortcut and Android speaker cleaner option release out the high-pitched sound. The dust particles and fluids are thrown out from the internal components due to high-frequency sound waves that are being made.
P.S. The regular music songs don’t have such a squeaky tone, so they are not successful in clearing speakers.
Add and Activate Siri Water Eject (iOS)
- Download the Shortcuts app.
- Via browser, go follow iCloud link for the Water Eject Shortcut.
- Hold up until the Shortcuts app is installed.
- Click the “Add Untrusted Shortcut” option on the Add Shortcut page, as long as you accept including an untrusted shortcut.
- Say “Siri, Eject Water” after boosting up the shortcut.
P.S. Otherwise, it can be added to the device’s home interface, which has a button “Begin Water Ejection”.
Access the “Clear Speaker” Option (Xiaomi or Any Device With MIUI Software)
- Choose Settings, then Additional Settings.
- Scroll and find the “Clear Speaker” option (or Speaker Cleaner, depending on how your OEM calls it (original equipment manufacturer).
- Play “Clear Speaker” at least 30 seconds.
- Maximise sound mode for best effect.
- Start playing this feature 2-5 times while shaking your phone with the speaker faces downwards.
Clear Speaker option for Android
Use a Speaker Cleaner App
If there’s no option “Water Eject” or “Clear Speaker”, you can seek out speaker cleaner apps. They work the same way having several built-in cleaning modes that remove water from gadget.
Water Eject Shortcuts: instructions
Begin Water Ejection option
How to Get Water Out of Your Phone Speaker On Samsung
- Go to Play Store and find an app called “Speaker cleaner – Remove water & fix sound.”
- Install “Speaker cleaner – Remove water & fix sound.”
- Open the app and tap Clean Speaker.
- After the sound is complete, tap Yes.
- If you’re still hearing a hiss, choose Restart.
Clean Speaker by LuxDelux
The advantage of this app is that it finishes work in seconds. Download and install it, so that the automatic mode will eject water droplets or other foreign particles from your mobile speakers.
By the way, one more benefit you get after launching is the ability to use it on moistened smartwatches.
How to Get Water Out of Your Phone Speaker on iPhone
The Sonic app from the App Store generates tones of different frequencies. This app plays loud sound that removes water resistant from speakers. So, you’ll need to:
- Put a device on an inclined surface toward the bottom.
- Increase the phone volume to the maximum.
- Download the Sonic app.
- Press and pull down the water drop icon.
- Regulate the frequency (160-200 is recommended).
- Repeat several times for better efficiency.
The Sonic app for iPhone: adjust frequency to remove water
Clear Wave by Brilic Media
The Clear Wave app produces sound to get water out of the speaker by playing ultra-low, high-frequency sound waves. The difference between it and Speaker Cleaner featured in variable frequency output. So, you can adjust the sound level on Android phone at your discretion.
It is also available through an App Store for iOS for free.
How to Get Water Out of Your Phone Speaker on Android
We recommend testing the “Speaker Cleaner – Remove Water, Dust & Boost Sound” app on the Play Store.
- Install and launch this app.
- If you need to clear an ear speaker, switch to the Ear Speaker option to push water out of it.
- Hit Start Cleaning, so the speaker faces down.
- Once done, play sound through a loudspeaker or earbuds on the phone.
How to Get Water Out of Your Speaker in 5 Ways
1. Leave the Device To Dry On Its Own
Make sure that it’s off and not connected to the lightning cable. Take off the case as a rubber gasket that covers a charging port may interfere water evaporation. Keep the phone face downwards; however, let the air flow beneath so that the speaker can dry naturally. Consider about environmental conditions; it should be warm. If there are some water droplets by any chance, they will fall out from a phone’s speaker due to gravity.
2. Clean Water From a Speaker Grill
It’d be best if you were careful while doing it in case there are tiny speaker grills on your gadget. So, it’s recommended to take a toothpick as it has a thin end and push it to a speaker slot. Then, softly wipe the water droplets as they stick to a toothpick due to adhesion, a force that makes water molecules cling to other surfaces.
Collect Water With a Toothpick
3. Apply a Small Vacuum Cleaner
Ensure the settings of the handheld vacuum cleaner have the lowest suction power. Avoid keeping it close to a speaker grill, as a strong air flow can harm the speaker’s electronics.
Use Handheld Vacuum Cleaner With Lowest Suction Power
4. Shake Off Your Device
Has the above method not worked out? Try such a way when you shake your gadget. If any liquids are stuck on a speaker, they could be forcibly moved out. Note that you should be careful as your phone can drop down.
5. Use Silica Gel Packs To Soak Up Wetness
Silica gel is an excellent replacement for rice grains mentioned before. It is a drying agent that helps absorb moisture and prevent products from water damage. To get better and quicker results, put a mobile phone in a closed box with some packs of silica gel and wait until you see no evaporation in the package.
What To Do If Fluids Still Remain Inside?
If the techniques listed above weren’t successful, you definitely need to go to a service center in order to determine the nature of a problem. It doesn’t sound optimistic as some circuit details may be broken or require deep cleaning. Although you consider yourself a technophile, we recommend having a repair center as a priority to prevent any additional malfunctions.
Finalizing
There are many apps and built-in functions on the phones to clear the speakers out and just check the sound quality. Our main advice is to keep your device away from liquids and high temperatures. Nonetheless, if you spilled water on a gadget or dropped it on a waterlogged pitch, quickly use these apps to eject water out of speakers. If you see more significant consequences, kindly bring it to the official service center, so they can get your speaker dried up.
FAQ
What happens if you get water in your speaker on your phone?
How do you make water out of your phone speaker without rice?
Is the water eject shortcut safe?
